Informācija par preci

Turn weak 4G\/LTE into shared Wi‑Fi for RVs, boats, campers and mobile homes. The Camp-Pro 2+ Global lets multiple devices use one mobile data connection, helping you stay online where the tower is far away.Easy mobile setup with a web page and QR code scanning gets you online fast. This 4G internet sharing kit is designed for on-the-go use, making hotspot setup simple from a laptop or computer USB port.Global band support for wider network compatibility: LTE FDD B1\/B2\/B3\/B4\/B5\/B7\/B8\/B12\/B13\/B18\/B19\/B20\/B25\/B26\/B28, LTE TDD B38\/B39\/B40\/B41, plus WCDMA and GSM bands for supported mobile networks.Built for vehicle installations with surge protection to help guard against accidental damage from ignition spikes. A practical choice for RV, camper and boat setups where power conditions can vary.Reliable local Wi‑Fi performance with IEEE 802.11b\/g\/n and up to 300 Mbps on 802.11n. Security options include WEP, WPA\/WPA2, WPA-EAP and 802.1x for flexible network protection.Mobile 4G WiFi SystemThe ALFA 4G CampPro 2+ is a mobile Internet sharing system designed to distribute a cellular data connection over WiFi for use on boats, RVs, and mobile houses. It works with 4G LTE, 3G, and 2G services and is intended to share one mobile data connection with multiple WiFi devices. The system is presented as an easy-to-set-up solution for mobile environments, while vehicle power surge protection addresses installation in vehicles where the power supply may be subject to voltage fluctuations. This combination makes the CampPro 2+ suitable for locations where cellular Internet needs to be made available locally to several wireless clients. It is specified for operation from -20°C to 40°C, with storage humidity of 10% to 90% non-condensing.Local wireless access is provided through IEEE 802.11b/g/n, with 802.11n data rates of up to 300 Mbps, while 802.11g and 802.11b support lower maximum rates. The WiFi connection operates with 20 or 40 MHz channel widths and supports a range of wireless security options, including 64/128-bit WEP, WPA-PSK, WPA-EAP with PEAP/TTLS, WPA2-PSK, WPA2-EAP, WPA Mixed, and 802.1x authentication. These options allow the local wireless network to use different authentication and encryption methods according to the intended network configuration. LED indicators for Power, LAN, WAN, WLAN, and USB provide visible status information for the main connections and operating functions.Cellular Antenna SetupThe CampPro 2+ combines the R36AH unit with a Tube-U4Gv2 cellular modem and separate indoor and outdoor antennas. The Tube-U4Gv2 uses a Micro SIM slot and a Mini-USB 2.0 interface, with Power/Connection LED indication and a 5 V ±5% power requirement. Its cellular data capability reaches up to 150 Mbps downlink and 50 Mbps uplink on LTE FDD, while LTE TDD supports up to 130 Mbps downlink and 35 Mbps uplink. The modem also supports DC-HSDPA, HSUPA, WCDMA, EDGE, and GPRS data modes, providing operation across the cellular technologies listed for the system. An N female connector is provided for the modem antenna connection.For cellular reception, the supplied outdoor omnidirectional antenna covers 791–960 MHz, 1710–2170 MHz, and 2300–2700 MHz and uses an N male connector. The indoor omnidirectional antenna operates from 2.4 to 2.5 GHz and uses an RP-SMA female connector. The R36AH itself measures 93 x 70 x 26 mm and requires 12 V DC power. The 4G CampPro 2+ Global version supports LTE FDD bands B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 and LTE TDD bands B38/B39/B40/B41, together with WCDMA B1/B2/B4/B5/B6/B8/B19 and GSM B2/B3/B5/B8. This broad band support allows the Global version to operate with compatible cellular networks across multiple regions, with actual compatibility depending on the bands used by the selected mobile network operator.