Informācija par preci

CEE 32A Reduction to 230V – Robust and Safe Power Adapter A professional CEE 32A to 230V adapter designed to power single-phase 230V devices from an industrial CEE 32A 3P+N+E 400V socket. The adapter uses one phase from a three-phase installation and provides a standard 230V SCHUKO output. It is a practical solution for workshops, service applications, temporary installations and mobile EV chargers. Durable CEE connectors and a 3 x 2.5 mm² cable ensure stable operation with a maximum load of 16A (3.5 kW). EV 230V Charger Adapter – Correct Connection and Safe Use The adapter must be connected only to a functional CEE 32A 3P+N+E (400V) socket protected by suitable overcurrent and residual current protection. After inserting the CEE plug, make sure the connection is secure and fully seated. A 230V device can then be connected to the SCHUKO socket, provided that the total load does not exceed 16A (3.5 kW). When using this adapter with a mobile EV charger, set the charging current to no more than 16A. Do not exceed the permissible load and do not use the adapter if the cable, plug or housing is damaged. Please note that this product does not increase installation power and does not convert the supply into a full three-phase output. It simply reduces the connector type from CEE 32A 400V to 230V SCHUKO. Ideal for Workshops, Construction Sites and EV Charging This 400V to 230V reduction adapter is a practical technical solution that enables a safe transition from an industrial power source to standard 230V equipment without modifying the electrical installation. It is suitable for: Mobile single-phase 230V EV chargers, Power tools and construction equipment, Service and workshop devices, Temporary installations, Power supply for 230V devices where only a 32A industrial socket is available. Clear Terminal Markings – Fast and Safe Cable Installation The adapter is equipped with clearly marked terminals that make cable installation easier and safer. To connect the cable correctly, strip the wire ends, insert them into the corresponding terminals and tighten the fixing screws securely. The PE protective conductor should always be connected first. The durable housing with a protective flap helps protect the contacts against dust and moisture, improving long-term reliability and safety. Terminal markings: - L1, L2, L3 – phase conductors - N – neutral conductor - PE – protective conductor (earth) When connecting the cable: 1. Strip the wire ends. 2. Insert the conductors into the correct labelled terminals. 3. Tighten the fixing screws securely. 4. Connect the PE protective conductor first. 24-Month Warranty Looking for a reliable and durable power adapter? Qoltec solutions are designed to meet demanding technical and everyday usage requirements. This product is covered by a 24-month warranty from the date of purchase. Product Description The Qoltec CEE 32A to SCHUKO 230V adapter enables safe power supply for single-phase 230V devices from an industrial CEE 32A 3P+N+E 400V socket. It is especially useful for powering mobile EV chargers, power tools and service devices that require a standard 230V SCHUKO outlet in locations where only a 32A industrial socket is available. - Use only within the specified technical parameters: max. 16A / 3.5 kW - For mobile EV chargers, the charging current must be limited to 16A - Not suitable for three-phase devices Read the user manual before connecting. Technical Data Producer Qoltec Type CEE 32A to SCHUKO 230V Number of phases The adapter draws one phase from a three-phase installation Maximum power 3.5 kW Output current 16A Output voltage 230V Plug type CEE 32A to SCHUKO Conductor cross-sectional area 3 x 2.5 mm² (L + N + PE) Cable length 0.30 m Compatibility Power supply for 230V devices in locations equipped only with 32A power sockets IP Rating IP44 Notices 1. Incorrect use of the 400V to 230V power adapter, especially exceeding the permissible load of 16A (3.5 kW), may lead to overheating of the 3 x 2.5 mm² cable, insulation damage and connector damage. 2. Long-term use under excessive load increases the risk of melting SCHUKO socket components, voltage drop, unstable operation of the connected device and, in extreme cases, short circuit or fire. 3. Lack of proper overcurrent and residual current protection may result in insufficient safety in the event of overload or cable damage. 4. Using the adapter with an EV charger set to 32A or connecting 400V three-phase devices is improper use. Please note: The adapter does not increase the power of the installation and does not convert the three-phase supply into a full three-phase output — it uses only one phase. Additional information Warning: Does not support three-phase devices Colour Red, white, black Package Box Package depth / length [mm] 100 Package width [mm] 245 Package height [mm] 80 Net weight [kg] 0.388 Gross weight [kg] 0.435 Certificate CE Warranty 24 months